Falcam - Geartree Home Studio ประกันศูนย์ไทย

This Floor-to-Ceiling Stand from Falcam is part of the GearTree Home Studio System. This sturdy aluminum pole has an adjustable height and can be mounted in rooms with ceilings from 6.9' to 8.5' high. Once set in place, a variety of extension arms, pneumatic arms, and triangular extension arms may be attached to create a customized home studio with a tiny footprint.

NOTE: Not suitable for use in rooms with suspended ceilings.

This Extension Column for GearTree Stand from Falcam is a durable, lightweight aluminum column that adds 1.6 feet to the height of the GearTree Studio Stand for use in rooms with very high ceilings.

This Basic Extension Grip Arm from Falcam adds 10.6" of extension to the Geartree studio stand. It attaches using a standard 5/8" stud and has a 5/8" receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked and used to extend various types of equipment to broaden the shooting range.

This Geartree Clamp with Three 5/8" Receivers from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features three 5/8" stud receivers and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.

This Geartree Clamp with 5/8" Receiver from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features one 5/8" stud receiver and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.

This Articulated Boom Arm from Falcam adds an 18" articulated extension to the Geartree studio stand. The precision machined aluminum sections feature stainless steel springs that provide a a counterbalance load capacity of up to 2.27 pounds. The end of the boom arm features a mini ball head for adding a camera, microphone, compact light, monitor or more.

Attach this rectangular GearTree Table Top to the Falcam desk stand or studio stand and place a laptop, switcher, stream deck, or other accessories onto it for easy access. The integrated 5/8" stud at the bottom easily attaches directly to the GearTree basic extension arm or pneumatic arm. This 11 x 15.4" table top can support devices up to 44.1 lb. Its aluminum alloy construction ensures it is lightweight and durable.

Connect this Falcam Full Motion Swivel Arm to your desk stand to mount and adjust fill lights or cameras for your content creation needs. One end of the swivel arm has a 5/8" stud and the other has a 5/8" receiver. It can support equipment up to 19.8 lb and it has a height adjustment range of up to 11.8". An aluminum alloy construction ensures it is durable and lightweight.

Pan, tilt, or roll your camera with this Geartree 3-Way Roll Head from Falcam. A 1/4"-20 screw on the quick release plate is compatible with your DSLR camera up to 6.6 lb. The head attaches to the Falcam Geartree stands with the integrated pin and is compatible with F22 and F38 quick release accessories thanks to its quick release mount. Adjusting the position of your camera is a breeze with the built-in handle and bubble level. Tightening the side knob can adjust the tension or lock the head entirely. Its aluminum alloy construction creates a durable and lightweight design.

This Triangle Extension Arm from Falcam is a triangular-shaped arm for use with the the GearTree Home Studio floor-to-ceiling stand. This 32.3" long arm connects to the stand's center column with two mount adapters and has a 66.1 lb load capacity. The end of the arm features dual 5/8" receiver sockets

NOTE: Not for use with desk studio products.

This Reversible Mounting Stud for Geartree from Falcam allows the Basic Extension Grip Arm and Full Motion Swivel Arm accessories from the Geartree system to be attached to any available mounting holes. The standard dimension adapter allows other brand adapters to also be attached to the Falcam Geartree. This stud is compatible with 5/8" receivers and is reversible. This mounting stud is machined from stainless steel.

In the Box

• Falcam Floor-to-Ceiling Stand for GearTree
• Pendant
• H5 Hex Key
• Magic Strap
• Limited 1-Year Warranty
• Falcam Extension Column for GearTree Stand (1.6)
• Limited 1-Year Warranty
• Falcam Basic Extension Grip Arm for Geartree
• M6-20 Locking Screw
• M6-8 Stainless Steel Taper Screw
• 35mm POM Gasket
• 40mm POM Gasket
• H3 Hex Key
• 2 x Magic Strap
• Limited 1-Year Warranty
• Falcam Geartree Clamp with Three 5/8" Receivers
• 3 x M6 Locking Screw
• 3 x M6 Taper Screw
• 2 x POM Gasket (1.4")
• 2 x POM Gasket (1.6")
• Allen Key
• Magic Strap
• Limited 1-Year Warranty
• Falcam Geartree Clamp with 5/8" Receiver
• M6 Locking Screw
• M6 Taper Screw
• 2 x POM Gasket (1.4")
• 2 x POM Gasket (1.6")
• Allen Key
• Magic Strap
• Limited 1-Year Warranty
• Falcam Articulated Boom Arm for Geartree
• Wrench
• 1/4" to 3/8" Screw
• 3/8" to 5/8" Screw
• 2 x Magic Strap
• Limited 1-Year Warranty
• Falcam GearTree Table Top (Rectangular, 11 x 15.4")
• 5/8" Stud
• Screw
• Allen Key
• Limited 1-Year Warranty
• Falcam Full Motion Swivel Arm
• M6 Locking Screw
• M6 Taper Screw
• H3 Allen Key
• H5 Allen Key
• Limited 1-Year Warranty
• Falcam Geartree 3-Way Roll Head
• 2 x Allen Key
• Limited 1-Year Warranty
• Falcam Triangle Extension Arm for GearTree Studio Stand
• 2 x M6-20 Locking Screw
• 2 x M6-8 Stainless Steel Tapered Screw
• H3 Hex Key
• Magic Strap
• Limited 1-Year Warranty
• Falcam Reversible Mounting Stud for Geartree (15.8mm)
• Limited 1-Year Warranty